Dear friends, if you are planning to improve/renovate or refurnish your home then this article can be a very useful guide and save your lot of time. When it comes to home improvement, most people think that it's has to do with painting the house from inside out and forget about it. But any architectural structure is much more than just walls and ceiling. There are many systems working simultaneously which keep the building under function. Let's have a look at these systems one by one. 1) Structural System: This includes the support system of the entire building, namely foundation, columns, beams, slabs(in R.C.C structure). The most commonly used structural systems is R.C.C. Other types include steel and wood. While renovating a building special attention must be given to the structural support system. Slabs should be checked to be leak proof. Columns and beams which are exposed to external atmosphere must be checked for damage. R.C.C structural members are always covered with plaster. This plaster must be without damage. In case of steel structures, anti-rust treatment must be applied wherever necessary. In case of wooden structure anti-termite treatment must be applied wherever necessary. 2) Plumbing System: All pipelines which carry water in and out of the structure must be checked for leakage. The main are of possible leakage is at the joints, hence must be carefully treated. Water taps at the washbasins, inside bathrooms, kitchen sinks, toilet blocks, should be checked for good and smooth operating conditions. 3)Drainage System: Drainage from kitchen, bathrooms, toilets should have an unobstructed and shortest path to outside chambers. Any clogging of these lines can cause overflowing of the chambers, hence should be checked and cleaned. 4)Electrical Systems: This starts with the main supply of the electricity from the local authorities. The point of entering the main supply should be checked for any excessive disturbance in voltage levels, which might cause damage to electrical appliances inside. All switch boards and switches in respective rooms should be checked for proper and safe functioning. Security systems such as earthing and M.C.B's should be checked for safe functioning. 5) Doors and Windows These form an important part of any structure as far as safety is concerned. Proper functioning of the doors and window shutters is necessary. If your home has a security alarm system installed, then it must be kept updated and in proper working condition. Door and window shutter hinges should be applied with lubricants for smooth operations. I case of sliding doors and windows, tracks which allow sliding should be dust free. 6) Glass Panes All glass panes used on windows and doors should be dust free. Any broken or cracked glass panes should be replaced immediately. If the building has a skylight, then it should be checked to be leak proof and clean, to allow clear and unobstructed sunlight in the interiors. 7) Flooring Materials In most cases tiles are used for flooring. All tiles should be checked for cracks and most importantly leveling. In every home flooring has a natural slope to avoid clogging of water if any such situation arises. Tiled flooring must be checked at joints. Any cracks in joins must be checked with proper bonding material. In case of wooden flooring, extra care must be taken to keep the flooring termite-free. 8) Wall Plaster and Wall Paint. All external walls must be checked from outside for a proper layer of plaster. Plaster prevents the rainwater to seep inside the structure. If external plaster gets damaged, rain water seeps inside causing dampening of walls. All internal walls must be checked for scraping of paint. 8) Furniture and Carpentry Items. All furniture items must be termite free and sturdy at the joints. A coat of good quality wooden polish can add life to the furniture pieces. Other carpentry work includes door and window shutters, door and window frames. 9) Other Accessories. This includes small thing which matter a lot, such as all the locking arrangement at doors, windows, towel rods in the bathroom/wash basins, arrangement to dry washed clothes, storage arrangements in kitchen/bathroom. 10)External Systems This can include a solar water heater, electric pumps to push the water from underground water tank to Overhead water tank., Cable TV antennas. All these systems must be checked for proper functioning. From the above discussion it is clear that proper functioning of any architectural structure is dependant of many complex systems which work simultaneously. Hence all these must be given attention and respect. Any building is just like a human body, with movable and stationary parts. If dealt with proper care can give a very healthy living experience for years to come. I hope this article was helpful to everyone. Copyright 2005 Shrinivas Vaidya |
About Us
